You should. Its an anti siphon device that as described in other posts can be repaired/ replaced. But your best bet is to replace the entire spigot because of age and variation in parts ( they are not universal and every manufacturer loves to discontinue parts) if this was damaged because the hoses/ splitter was left on during freezing weather it probably damaged the entire unit. You should also install a isolation valve when you replace it for future issues. Also as others stated it is a frost free spigot and truly is not a big job with some common plumbing. Its usually accessible in the joist below the floor not so much “in the wall”
I went under the house today to look at what would be involved in replacement. The insulation covers the plumbing. So I took my pictures and went to the hardware store. They had a replacement. Got home, and after a bit of struggling I got the old anti siphon device out. Turns out it was not broken, just the piece that lifts was off kilter and stuck. Put everything back together, and then I remembered there is also a leak the comes through the hand wheel. But it is far less than the leak that was through the anti siphon device. Maybe next week I will replace the rest of the spigot.
You should. Its an anti siphon device that as described in other posts can be repaired/ replaced. But your best bet is to replace the entire spigot because of age and variation in parts ( they are not universal and every manufacturer loves to discontinue parts) if this was damaged because the hoses/ splitter was left on during freezing weather it probably damaged the entire unit. You should also install a isolation valve when you replace it for future issues. Also as others stated it is a frost free spigot and truly is not a big job with some common plumbing. Its usually accessible in the joist below the floor not so much “in the wall”
E: and take the damn hose off in the winter
Just make sure to get the angle correct, otherwise the “frost free” bit won’t work so well.
I went under the house today to look at what would be involved in replacement. The insulation covers the plumbing. So I took my pictures and went to the hardware store. They had a replacement. Got home, and after a bit of struggling I got the old anti siphon device out. Turns out it was not broken, just the piece that lifts was off kilter and stuck. Put everything back together, and then I remembered there is also a leak the comes through the hand wheel. But it is far less than the leak that was through the anti siphon device. Maybe next week I will replace the rest of the spigot.
Right on. Let me know if u have questions. I’m usually on here judging others peoples repairs instead of fixing my own broken stuff.