I imagine users go poof. Are their profiles stored in other federated instances? Is there a way to recover them or “import from backup” onto another instance?
If they don’t have an e-mail I imagine you can’t even notify them or authenticate them elsewhere so this “import from backup” even if technically feasible (idk if it is) would be impossible in practice due to authentication issues.
And communities, can you even notify all your subscribers to move to the “backup community” on another instance? I saw yesterday that a Mastodon server host said “I’m deleting this instance in 2 days” or something like that and I started wondering how shit would go on Lemmy.
The devs need to add an account migration feature so that you can export your account to another instance.
Like, when you switch email providers, you just download all your emails and then set up a redirect so people emailing you go to your new account. It should be the same on Lemmy. I hope they add this feature, but I’m sure the devs are really busy right now trying to make sure lemmy.ml doesn’t go down tomorrow.
yeah i’ve been seeing devs just scaling up massively and still getting hugs of death, pretty fun to watch, probably very much not as fun to experience first-hand. I’ve had servers die to hugs of death and it’s a very stressful experience.
Yeah, must be a very stressful weekend for them as things escalate over at Reddit.
It doesn’t sound like the tier 2 instances (aka not lemmy.ml) are very hard to run at least. Lemmy.world said that they’re only using a single 8vcpu/32GB VPS.
thanks! my server is smaller than that, thinking of setting one up but kinda bored about it cuz i also have a very busy job and i’m poor so spending money and time on servering would be a bit counter-productive to my current pursuits
on the other hand, it sounds fun, so i might do it anyway for the kekkities
I’m setting up a Kubernetes config to make it easy to set up and scale, at the moment actually! I’m hoping that it helps lower the barrier to entry for people to run their own personal instances.
I would say that hosting a public instance is a very big commitment though, since any users that sign up are depending on you to keep it running indefinitely.
There’s a cache on other instances that contains (some) posts and comments the instance received previously, but everything is bound to break when fetching new comments and posts fails. I wouldn’t rely on it.
Lemmy/Mastodon/kbin/other ActivityPub servers are federated rather than fully distributed. That’s where the name Fediverse comes from (it’s not, like some people think, invented by some federal government). That means servers maintain accounts and data, but can interoperate between each other. This is different from, say, BitTorrent, which can operate almost entirely without servers (through the DHT) and still maintain data.
Lemmy, kbin, Mastodon, and other Fediverse servers work very much in the same way email worked back in the day, when it comes to servers. You can exchange messages between Gmail and Outlook in the same way you can exchange posts between Lemmy and Mastodon, and back when message lists were a thing you could subscribe/post to lists on other servers as well.
If Gmail dies without notice, you can still read the emails you’ve received for as long as they’re kept on your server (back in the old days of 1-10MB mailboxes that wasn’t very long!) but you can’t do much else with it.
Lemmy’s local storage isn’t really meant for safeguarding data. It’ll probably keep messages from other servers for some time, but don’t expect to interact with them well, or to recover your account.
Even in Mastodon, which does support account migration, toots disappear when the original server dies. Moving accounts works by redirecting other instances to the new location, with old toots left at the old place. If a server does after moving, the old toots disappear but the new toots stay up and your followers will automatically follow your new account. If the server dies without moving your account, everything is gone.
There have been some improvements since the invention of email, though. For example, if an email domain goes down, anyone can register the expired domain and host a new server, pretending to be the people on the old server and receiving mail destined for their now dead email address.
With (correctly implemented) ActivityPub clients (like Lemmy/kbin/Mastodon), this is impossible without a backup of the database, because every account has a secret key that’s used to verify data (posts, comments, follow requests). So, even if Lemmy.ml goes down and some asshole buys it to send spam from “trusted” accounts, they won’t be able to!
I don’t think there are fully distributed social networks out there today. Even nostr, a Twitter alternative with a basis in blockchain, has the issue that if a “relay” you used to post content goes down, that post disappears. The problem is that all of that data needs to be kept somewhere, and there’s a lot of content to keep. Every message would need to be mirrored a few times because you don’t want to lose your messages when you drop your phone, but you probably also don’t want to store random people’s messages and have a server on your phone drain the battery serving them back to the network!
Your best bet to protect your account is to self-host. That means setting up your own server that you manage, with your own backups and your own rules and accounts. This isn’t exactly a one click thing, you’ll need some Linux server knowledge, but it’s what me and many other techy Lemmy/kbin people do.
I don’t think there are fully distributed social networks out there today. Even nostr, a Twitter alternative with a basis in blockchain, has the issue that if a “relay” you used to post content goes down, that post disappears. The problem is that all of that data needs to be kept somewhere, and there’s a lot of content to keep.
That’s exactly how Hive works by the way, each witness has a copy of the blockchain software, and to run a node and earn money from it, they must “sync” the blockchain and that means running all the blocks software to reproduce all blocks one by one. This process can take hours or days to finish. But afterwards, any node or group of nodes can die and as long as one witness node exists for every microservice (main chain, hive engine side chain for tokens, some metadata chain and there’s a few other things ppl have invented idk what for), all data is safe. So as you say, it’s expensive and a bit crazy to require everyone to host all the content available but when done it gives some safety to your data.
Hive is not federated tho. It’s one thing, just hosted by many with 100% redundance.
Your best bet to protect your account is to self-host.
I was thinking of doing that, setting up my own server, but for some reason all the communities on the server I’m on (sh.itjust.works) are very small and the ones on lemmy.ml grow a lot, so it makes me think that it’s much harder for people to find communities hosted on smaller servers than on big ones? Maybe I’m misreading the reasons.> Your best bet to protect your account is to self-host.
Hive is a pretty funny name because there are two Hive networks with social features that have absolutely nothing to do with each other. I’m going to assume you’re talking about the cryptocurrency based system.
You can post and subscribe from your own Lemmy/Kbin perfectly fine, by the way. I’m on my own server and I’ve only created a single community (for a theoretical blog). What you do to follow a community on another service is search for !community@server.com (maybe wait a sec or search again if it doesn’t show up) and then you can join no problem.
i was talking about hive.io / hive.blog / peakd.com / leofinance.io and other such dozens of links that all point to the same hive blockchain network thingy
and yeah i know that, thanks for the info tho :) appreciate it
how much storage space would one need on average if you are a hobbyist self-hoster? If I make my own server and, say, it gets a bit popular with thousands or tens of thousands people, all posting text, images and even videos all day, I imagine I will soon run out of places where to put all my hard drives, not to mention the electricity bill…
My instance has grown to a few hundred megabytes in size for the messages (almost all coming in from other servers) and then there are the files.
That’s for about 422k entries in the database, so I’m pretty sure all the communities I’m following are the cause. At that point, I don’t think it’d matter if I hosted five people on my server or five thousand; their posts are probably going to end up on my server anyway.
And besides, I don’t need a long term copy of all that data. I can probably purge data every week to keep the database to a few hundred megabytes or so.
Going by this post a $12 VPS with 500GB of storage should do just fine for years if you don’t accept too many files. All of Wikipedia is about 20GB of text, but image files will probably be your biggest issue.
There’s a risk of user rush, but Lemmy’s design allows for manual approval of all user accounts. If you don’t want to run the risk of exceeding your bounds (or dealing with moderation fallout) then only allowing you and your friends would be a perfect middle ground.
Followed because I am also interested in knowing.
le dot.
This is pretty significant and needs addressing. There has to be a way of backing up and transferring data to another instance or, once a large instance goes down, I feel a lot of people will jump ship.
I can’t speak about kbin & Lemmy, however for Mastodon and Calckey there is a feature to export your user data and posts. You can then retain these for reference. Currently there is no ability to import them to a new instance – the technical reason for this is beyond me, but I believe it’s related to the UID of the posts as it is shared across the Fediverse.
People are working on solutions, and I have tested one which works well for Mastodon.
It’s very important to have the ability to extract your own data and move
Best would be if there is an app, that would do backups of your posts and content automatically, that if, for whatever reason, the instance goes down. You have first all of your data saved and second you could import it fast onto another instance.
If the owner has a backup, you can always recover the instance, but otherwise everything is lost. That’s the downside of federation I guess.
Is there anything I can do as a user to make sure I don’t get Thanos’ed out of existence if the owner of an instance decides he’s shutting down?
I’m afraid not, short of running your own instance. Hopefully Lemmy will support user data export some day.
is ur pfp AI?
also agreed and thank u for the info, waiting for someone to make an export plugin or something, im not the best suited for it cuz i know 0% Golang.
The admin giveth, the admin taketh away.
take me away daddee
Poof, all gone.
